Energy-efficient spray foam solutions for Auburn, AL. Roofing, insulation, and coatings that reduce energy costs and extend roof life by decades.
Full-spectrum spray foam solutions for residential and commercial buildings in Auburn, AL.
Ponding water, chronic leaks, and moisture infiltration destroy roofs and building interiors. Our waterproofing systems use closed-cell spray foam and silicone coatings to create an impermeable barrier that handles standing water indefinitely.
Transform your building with a spray foam roof that insulates, waterproofs, and strengthens in a single application. No tear-off required over most existing substrates. Backed by manufacturer warranties and our own workmanship guarantee.
Our maintenance programs extend roof life and reduce total cost of ownership. Semi-annual or annual visits include drain clearing, seam inspection, penetration checks, coating condition assessment, and immediate repair of minor issues.
Large-scale commercial roof restoration using SPF and coating systems that extend roof life by 20 or more years without the cost and disruption of full replacement. Phased scheduling available to keep your business operational.
High-performance silicone roof coatings that resist ponding water, UV degradation, and extreme temperatures. Unlike acrylics, silicone does not re-emulsify in standing water — making it ideal for flat roofs with drainage challenges.
Active roof leak? We locate the source using advanced detection methods, then repair it permanently at the root cause. No guesswork, no temporary patches — just lasting results backed by our workmanship warranty.
Comprehensive roof inspections using infrared moisture scanning, core sampling, and visual assessment. Detailed photo-documented reports with condition ratings, remaining life estimates, and prioritized repair recommendations.
Stop metal roof leaks without replacement. Our elastomeric coating system treats rust, seals every fastener and seam, and creates a continuous waterproof membrane over your entire metal roof — backed by a manufacturer warranty.
When restoration is not enough, our crews perform complete roof tear-off and replacement with modern spray foam roofing systems. Full deck inspection, substrate repair, SPF application, and protective coating — all warranted.
Spray foam roofs are built to last, but they do need occasional repair. Our crews fix bird pecks, foot traffic damage, hail impacts, and coating wear — extending the life of your SPF system without a costly full recoat.
Upgrade your attic insulation from fiberglass or cellulose to spray foam and feel the difference the same day. SPF does not settle, sag, or leave gaps — it expands to fill every cavity and seals air leaks that other materials miss.
Cold floors, musty smells, and high energy bills often trace back to an uninsulated or poorly insulated crawl space. Our closed-cell spray foam seals the entire crawl space envelope — walls, rim joists, and sill plates — creating a conditioned space.
Emergency storm damage response with tarping, property protection, detailed damage documentation for insurance, and complete roof restoration to pre-storm condition. We work directly with insurance adjusters.
When your roof is structurally sound but the surface is deteriorating, restoration is the smart investment. We clean, repair, and recoat your entire roof with a warranted system that performs like new at a fraction of replacement cost.
Professional flat roof repair for all membrane types — TPO, EPDM, modified bitumen, built-up, and PVC. We find the actual source of the leak using infrared scanning and fix it permanently, not with another temporary patch.
In a city the size of Auburn, AL, property owners and facility managers need a spray foam contractor who can handle any scale — from single-family attic insulation to multi-building commercial roof restorations. Lapolla Industries has been delivering that capability since 2003, backed by a legacy in SPF manufacturing that sets us apart from general roofing contractors.
Our Auburn operations cover the full spectrum of spray foam services: new SPF roof installations, flat roof repair, silicone and elastomeric coatings, attic and crawl space insulation, and emergency storm damage response. Every crew is fully equipped, factory-trained, and committed to the precision that spray foam application demands.
Here is what sets Lapolla Industries apart from other contractors in Auburn.
Lapolla Industries has been at the forefront of spray polyurethane foam technology since 2003 — with deep roots in SPF manufacturing and application that few competitors can match.
Every project starts with a no-obligation inspection using infrared moisture scanning and visual assessment. We identify every issue and provide an honest, transparent estimate.
SPF roofing delivers the highest R-value per inch of any commercial insulation. Our customers typically see 20 to 40 percent reductions in heating and cooling costs after installation.
Our crews live and work in the communities we serve. We understand local building codes, climate conditions, and the best SPF systems for your specific region.
Every project comes backed by manufacturer material warranties plus our own workmanship guarantee. We handle all warranty registration so you are always covered.
Have questions about spray foam in Auburn? We have answers.
Yes. Every Auburn crew is fully licensed, bonded, and insured for spray foam roofing and insulation work. We carry general liability and workers compensation coverage on every project. You can request proof of insurance before any work begins.
Yes. Spray foam applied to crawl space walls and rim joists creates an airtight moisture barrier that eliminates condensation, musty odors, and cold floors. For Auburn homes with persistent crawl space moisture issues, closed-cell foam combined with vapor barrier encapsulation provides a permanent solution.
Yes. Spray foam roofing provides the highest R-value per inch of any commercial roofing insulation — typically R-6.5 per inch. In Auburn, this translates to significant cooling and heating savings because the seamless membrane eliminates air infiltration that accounts for up to 40 percent of energy loss in conventional roofs.
Spray foam insulation costs in Auburn typically range from $1.50 to $3.50 per square foot for open-cell and $3.00 to $7.00 per square foot for closed-cell. The exact price depends on the area being insulated, foam thickness, and accessibility. Most Auburn homeowners see a full return on investment through energy savings within 3 to 5 years.
Spray foam is one of the best solutions for flat and low-slope roofs in Auburn. The seamless application eliminates the seams and joints where conventional flat roof systems fail. SPF also self-levels to eliminate ponding water — one of the biggest causes of flat roof leaks and premature failure.
A properly installed SPF roof in Auburn can last 30 to 50 years with periodic recoating every 10 to 15 years. The closed-cell foam itself does not degrade — only the protective topcoat needs maintenance. Many spray foam roofs installed in the 1970s are still performing today.
See what our customers have to say about their experience with Lapolla Industries.
"Lapolla Industries has been maintaining our spray foam roof for three years now. Every visit they document the condition, clean debris from drains, and address any minor issues on the spot. Peace of mind is worth every dollar."
"We needed our concrete roof deck waterproofed before installing new equipment on it. The crew applied a monolithic membrane that handles foot traffic and ponding water. Two years in and zero issues. Money well spent."
"Hail tore up the coating on our foam roof and we had exposed foam everywhere. They responded the next day, documented everything for insurance, and had the entire roof recoated within a week. Fast, professional, and insurance handled smoothly."
Looking for a spray foam contractor near Auburn? We serve these surrounding areas too.